Skip to main content
#
 
Thursday, May 28 2015


The 4.2m Ripple recently built and delivered to the client in Brisbane has been recieved. The engine and fit-out has been done and the new owner had a brief opportunity to take the boat for a quick run before the all important lift with his new crane onto the roof of his power cat. He was very impressed with the liveliness and speed of the boat even though he didn't want to over-rev the new engine. The boat will be well-tested this weekend when the owner plans to spend the this time out in Moreton Bay. 

We have requested some photos of the boat underway so will post these as soon as we have them.

Posted by: Spirited Designs AT 08:32 am   |  Permalink   |  0 Comments  |  Email
Wednesday, May 20 2015

 

 

This carbon fiber boom will be fitted to a custom 18m racing carbon spreaderless rotating wing mast which is nearing completion. Both mast and boom are dressed in clear-finished carbon for maximum appeal. The boom was resin-infused using ATL Composites' Kinetix epoxy infusion system for superior strength. A split female mould was made for the external shape of the boom and then a secondary mould was required to produce the internal box-section spar. The boom is designed to catch and house the mainsail when dropped. The sails will be supplied by Doyle Sails from the Sunshine Coast Qld and will be state of the art racing sails.

The owner is hoping to have the rig stepped next month.

Posted by: AT 04:20 pm   |  Permalink   |  0 Comments  |  Email
Facebook
Twitter
LinkedIn
Email
Add to favorites

Boat Designs and Kits | Spirited News 

POWER-SAIL
Stow-Away
CrossOver

CONTACT

rss feedemail usour twitterour facebook page

P: (+61) 02 4981 8288
 

Disclaimer  Copyright © 2013 Spirited Designs. All Rights Reserved.