Skip to main content
#
 
Tuesday, April 22 2014

 

 

The 3.6m Ripple project mentioned previously has now been completed. The owners from Mackay Qld, happened to be on a road trip and collected the boat just after Easter. The load looked a little oversized but was secure once strapped on. This design was modified to include an extra 200mm of beam. The proportions look good offering more space internally. The bridgedeck is widened but still practical for rowing when seated with legs each side. The fit-out included lifting fittings and rubber fender strip. This wider design is available on request, for more information on our tender range, click here

  

Posted by: Spirited Designs AT 03:10 pm   |  Permalink   |  Email

Boat Designs and Kits | Spirited News 

POWER-SAIL
Stow-Away
CrossOver

CONTACT

rss feedemail usour twitterour facebook page

P: (+61) 02 4981 8288
 

Disclaimer  Copyright © 2013 Spirited Designs. All Rights Reserved.