Skip to main content
#
 
Monday, March 16 2015

 

This exciting project is nearing completion with the structure and main spar done. We are now installing the fittings and finalising the finishing details.

The shell is resin infused carbon/foam with a decorative clear carbon Twill exterior. In order to achieve a good clear carbon finish on the outside and to also be able to infuse the part we had to make a mould of the boom. We created a plug in order for the mould to come together as a split mould which it then released from each side of the part.

This boom is for a Spirited 380 which will be fitted out with a new carbon fiber mast and racing sails. This will be quite a show piece once rigged and we can't wait to see it all come together!

Posted by: Spirited Designs AT 08:30 am   |  Permalink   |  0 Comments  |  Email
Comments:

Post comment
Name
 *
Email Address

Message
(max 750 characters)
*
* Required Fields
Note: All comments are subject to approval. Your comment will not appear until it has been approved.

Boat Designs and Kits | Spirited News 

POWER-SAIL
Stow-Away
CrossOver

CONTACT

rss feedemail usour twitterour facebook page

P: (+61) 02 4981 8288
 

Disclaimer  Copyright © 2013 Spirited Designs. All Rights Reserved.